Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof head to suit later Dyson models too). You need this tool to perform virtually any strip down job on your Dyson.
The blade is the correct length to access all the deep recessed screws on your Dyson.
If you are likely to work on many Dysons, consider our "Unofficial Dyson Trade Tool Set" linked in the 'Related Items' below or the >>set of three Torx screwdrivers<< that has the extra ones you need to work on DC24 and later machines. It has all the correct screwdrivers with anti-tamper bits that you need on later Dysons.
Related Products
Dyson DC07 Workshop Manual
This is a new copy of the "The Unofficial Dyson DC07 Workshop Manual" by Angus Black. It is a 9" x 6..
£4.99
Dyson Belt and Brushroll Removal Tool
By popular demand: This is the (usually) trade-only Dyson belt/brushbar removal tool for DC04/DC07/D..
£7.49
DC33 Washable Pre Filter
This is a washable pre-filter to suit the Dyson DC33. It is the one located at the bottom right hand..
£7.99
DC04/DC07 Soleplate for Clutched Machines
This is a new soleplate to fit any clutched model of DC04 or DC07 vacuum cleaner. If you ar..
£15.99
Original DC04 Power Cable With Switch Housing
This is an original Dyson DC04 power cable. It comes complete with spade connections, moulded plug, ..
£25.00
DC01 Filters - Pack of Eight.
A packet of EIGHT filters to fit the DC01. These are superb quality new after-market items produced ..
£2.99
Soleplate to fit the Dyson DC14 and DC33
This is a genuine Dyson soleplate to fit all clutched models of the DC14 and DC33. If you a..
£18.99
Dyson DC26 Washable Pre-Filter
This is a genuine Dyson washable pre-filter to fit the DC26. ..
£17.99
New YDK type motor brushes to fit all Dyson models with "YV" motors. EXCEPT DC03 MOTORS - THESE WILL NOT FIT
New YDK type motor brushes to fit all Dyson models with "YV" motors. Please note: These..
£6.99
Dyson DC01 Motor Armature - YDK - YV-940 - YV-540
Dyson DC01 Motor Armature - YDK YV-940 / YV-540 This is an after-market motor armature to fit the..
£24.99
DC01/DC02 Power Switch
This is a new Dyson power switch for the Dyson DC01 and the DC02. It ONLY fits the DC0..
£1.99
Pack of two drive belts for non-clutched machines.
Pack of two original quality drive belts for non-clutched machines. These belts fit the following..
£2.99
Dyson Compatible Flex, Cable, Lead, Wire
This a new flex, (also known as the cable, lead, cord or wire) that is suitable for any Dyson u..
£8.99
DC02 Floor Tool
This is a cleaner head/floor tool to fit the Dyson DC02. Dyson discontinued DC02 spares som..
£13.99
DC18 Undercarriage Assembly
This is the undercarriage assembly from a Dyson DC18. A brand new genuine Dyson part. Unfor..
£47.99
DC25 Cyclone Top Handle
This the 'cyclone cap assembly' which is the cyclone handle and top from the DC25. This fit..
£17.50
DC15 Cleaner Head Hose
This is the cleaner head hose to fit a Dyson DC15. This is a replacement part for original ..
£7.99
YDK (YV) Motor Dyson DC04 DC07 DC14 DC27 DC33
This is a replacement motor to suit the following UK, European and Australian Dyson models:&nbs..
£20.99
DC01 Yellow Front Bumper
This is a new front bumper trim in yellow suitable for any variant (and De Stijl) of Dyson DC01 that..
£8.49
Cable Clip to Suit any upright Dyson
This is a new cable clip that goes on the end of your flex -- near the plug -- that allows you ..
£2.99
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a g..
£13.97
Recycled Ametek Motor - DC01
This a recycled Ametek type motor to fit the Dyson model DC01. New ones are no longer availa..
£19.99
Recycled YDK Motor - DC01
This a recycled YDK type motor to fit the Dyson model DC01. New ones are no longer available from..
£29.99
DC03 Motor YDK (YV-920)
This is a recycled YV920 motor to fit the Dyson DC03 (all colour variants). Dyson have discontinu..
£23.99
Dyson Power Switch (On Off Switch).
Power Switch for most Dyson Models (not DC01 and DC02). This is a recycled 2 prong / pole (..
£3.25
DC03 Clutch: Recycled or New
Recycled or new clutch with belts to fit all Dyson models and colour variants of the DC03. Recycl..
£12.99
DC08 Matsushita Panasonic Motor Kit (UDS1554CNA)
Nobody supplies the old DC08 Matsushita/Panasonic/UDS1554CNA motor any more. However, all is not los..
£35.99
YDK (YV) Motor Dyson DC02 DC05 DC08 DC11 DC19 DC20 DC21 DC29
This is an excellent quality replacement motor to suit the following UK, European and Australian Dys..
£21.99
Dyson DC04 Ametek Motor Adaptor Kit
The Ametek motor was fitted to the lime green and grey/silver non-clutched DC04 and t..
£7.49
Dyson DC19/20/21 Stair tool - 906960-11
This is a new, genuine Dyson stair tool to fit the following machines: DC19 DC20 DC2..
£9.99
Dyson DC19/20/21 Brush tool - 905903-06
This is a new, genuine Dyson brush tool to fit the following models: DC19 DC20 DC21 ..
£9.99
Dyson DC27 soleplate.
This is a soleplate to fit the DC27. This is a new, genuine Dyson spare part. This asse..
£29.99
Dyson DC25 Mini Turbine Tool
Please note: If this item is out of stock, please check out >>this item<< that is much c..
£29.99
Dyson DC04 On/Off Button Removal Tool
This is a new on/off button removal tool to suit all Dyson DC04 models (We don't chew up the button ..
£1.99
Brushroll (Brush Bar) to Suit Clutched Machines.
This is a new brushroll for machines with a clutch. If you are not sure if your Dyson has a..
£9.99
Brushroll (Brush Bar) to Suit Non-Clutched Machines
This is a new brushroll for machines without a clutch. If you are not sure if your Dyson ha..
£9.99
Brushroll (Brush Bar) and Soleplate to Suit Non-Clutched Machines
This is a genuine Dyson brushroll and soleplate kit to suit non-clutched models of the following mac..
£26.99
Bottom Internal Hose (Late Type)
This the small internal hose to fit the following Dyson models: DC04 (without a clutch*) DC0..
£7.99
Bottom Internal Hose (Clutched DC04 Type)
This is the small internal hose to fit clutched versions of the Dyson DC04. This is a new genuine&nb..
£8.99
DC04 Wand Handle - All Colours - NEW
IMPORTANT: Despite colour variants, there are two basic types of DC04, clutched and non-clutched (if..
£24.99
Wand Cover Swivel Cap to Suit the Dyson DC04
This the swivelling wand cover from the top of the wand on a DC04. This part has been ..
£3.99
Switch Housing for all Dyson Models DC04
This is a grey recycled switch housing to fit all Dyson DC04 models (the one you probably chewed up ..
£2.99
Standard Dyson Clutch
A genuine Dyson clutch with belts to fit the following Dyson models: DC04 (except the DC04 Zor..
£22.50
Clutch with Belts - For DC04 Zorbster Only
This is a recycled Dyson clutch with Belts to fit lavender and grey Dyson model DC04 Zorbster O..
£16.99
Pair of Clutch Belts to Fit Clutched Dyson Models
This is a pair of clutch belts to fit clutched Dyson models. This set includes: 1x mo..
£2.25
Dyson DC04 De Stijl Cleaner Head
This is the cleaner head for De Stijl models of DC04. This is a recycled item, so although ..
£9.99
Dyson DC04 Grey Chassis (Spine - Frame - Skeleton)
This is a grey chassis (some call it a skeleton, duct assembly, frame or a spine) with wheels and ax..
£27.50
T15 Torx Assembly Screws
This is a packet of ten Dyson T15 torx headed screws to fit most applications on most Dyson mod..
£1.99
HEPA Filter (Post Motor) DC04, DC05, DC08, DC19.
This is a post motor HEPA filter to fit the following Dyson models: DC04 DC05 DC08 ..
£4.49
Sponge Filter & Holder: DC04
This a new washable sponge pre motor filter and holder to fit model DC04 only. This will fit ANY ..
£3.75
-200x200.jpg "Dyson DC04 Zorbster Shampoo Crystal Dispensing Hopper")
Dyson DC04 Zorbster Shampoo Crystal Dispensing Hopper
Ever wondered what that lever at the front of your DC04 Zorbster was for? It is to mount a carpet cl..
£9.99
Dyson DC04 Dust Bin
This is the clear perspex dust bin to fit any model or colour variant of the Dyson DC04. A cleane..
£9.99
New Silver Dyson DC07 Cyclone Top Handle
Here we have a brand new top handle unit from the top of the cyclone unit to fit any colour var..
£12.99
Hepa Allergy Animal Filter to Suit DC07 & DC14
HEPA post-motor exhaust filter for all DC07 and DC14 models. This is a non-washable fi..
£4.99
Sponge Filter & Holder: DC07
This a pre-motor washable sponge filter and holder to fit model DC07 only. This will fit ANY DC07..
£3.99
Filter Catch to Suit the Dyson DC07/DC14
This is a new filter catch (filter clip) to fit the Dyson model DC07 in silver. This can als..
£4.99
Dyson DC07 Silver Chassis (Spine - Frame - Skeleton - Duct)
This is a grey/silver chassis (some call it a skeleton, duct assembly, frame or a spine) with wheels..
£42.75
Dyson DC07 Sliding Wand Cover Cap
This is the sliding wand cap from the top of the wand to fit any Dyson DC07. This is a cleaned an..
£2.99
Dyson DC07 Cyclone Bin Flap Catch (Spring Clip)
This is the little spring clip that keeps the bin flap closed that sits at the very bottom of the cy..
£2.49
DC25 Soleplate Assembly
This is the soleplate assembly to fit on the motorised cleaner head on the DC25 model. This..
£14.99
Dyson DC07 Cyclone Bin Flap Push Rod
This is the spring-loaded push rod that runs through the centre of your cyclone that pushes the spri..
£3.99
Dyson DC07/DC14 Inspection U-Bend
This is the u-bend to fit any Dyson DC07 or DC14. These were originally made in a myriad of..
£4.99
Valve Pipe Assembly DC07 DC14
This is the valve pipe assembly to fit any Dyson DC07 or DC14. These were originally m..
£1.99
Dyson DC07 Brushroll Housing for Clutched Models
Here we have the brushroll housing to fit any Dyson DC07 that is fitted with a clutch. If you are..
£3.99
Dyson DC04/7/14 Brushroll Housing for Non-Clutched Models
Here we have the brushroll housing to fit any Dyson DC04, DC07 or DC14 that is NOT fitted ..
£4.99
DC07 Wand Release Catch
This is the wand release catch in silver/grey to suit any colour variant of DC07 machine. It does..
£4.99
Dyson DC07 Motor Casing Cover and Post Motor Filter Cover
This is the front motor casing cover together with the post motor filter vent cover to suit any Dyso..
£10.99
-200x200.JPG "Dyson DC07 Filter Cover Housing")
Dyson DC07 Filter Cover Housing
Here we have the filter cover housing to fit any Dyson DC07. This is a cleaned and selected recyc..
£2.99
DC07 Bin Flap (All Colours)
Here we have the bin flap to fit any Dyson DC07. This is a cleaned and selected recycled item in ..
£3.99
Recycled Motor Rubbers for Dyson DC07/14/33 Models
Recycled motor rubbers to fit Dyson DC07 models. The main fan case seal (the bigger one) will als..
£1.99
New DC07 Rear Back Telescopic Hose -- All Colours
This is the rear hose to fit a Dyson DC07 suitable for *any* DC07 model. These are good qual..
£10.99
Post Motor Filter Pad DC07/DC14
This a new post motor filter pad to fit all models of DC07 and DC14 (if you don't want to b..
£1.99
Post Motor Filter Pad DC04 & Cylinders
This is a new post-motor filter pad to fit the following Dyson models: DC04 DC05 DC0..
£1.99
DC07 Dust Bin
This is the clear perspex dust bin to fit any model or colour variant of the Dyson DC07. A cleane..
£5.99
DC07 Cyclone Unit
Here we have the cyclone unit to fit any Dyson DC07. Please note: these come as pictured; t..
£25.00
Sponge Filter & Holder: DC05, DC08, DC14 & DC15
This a new sponge filter and holder to fit the following Dyson models: DC05 DC08 DC14 DC..
£3.99
DC14 Rear Back Telescopic Hose
This is the rear hose to fit a Dyson DC14. This will fit *any* DC14 model. The original hoses com..
£12.99
DC14 Post Motor Filter Cover
This is the post-motor filter cover to fit the Dyson DC14. This is a brand new genuine Dyson part..
£6.99
Dyson DC15 Brushbar Motor Assembly 909617-01
This part is the replacement motor which powers the brushbar in the head of your Dyson DC15. A br..
£64.00
HEPA Filter & Holder: DC15
This a new HEPA filter and holder to fit all Animal and Allergy models of DC15. This will fit ANY DC..
£16.49
DC15 SDS1104GZD Motor (909562-02)
This part is a replacement motor (the main one that sits inside the ball of your Dyson DC15). It&..
£65.99
DC15 Dusting Brush Tool
This is a new Dyson brush tool to fit all the Dyson DC15 ball range. These tools are unique to th..
£9.99
DC15 Stair Tool
This is a new Dyson Stair tool to fit all the Dyson DC15 ball range. These tools are unique to th..
£9.99
DC15 Printed Circuit Board (PCB)
This is the printed circuit board (PCB) that controls the motor in the cleaner head. We ship this..
£54.99
DC15 PCB to Yoke Loom
This is a new genuine Dyson wiring loom that connects the PCB to the yoke. The one that usually b..
£6.99
DC15 Brushbar Assembly
This is a replacement brushbar assembly for your Dyson DC15 vacuum cleaner. It includes both parts o..
£17.25
-200x200.JPG "DC24 Brushbar Motor Assembly")
DC24 Brushbar Motor Assembly
This part is the DF651(2)LG Johnson replacement motor which powers the brushbar in the head of ..
£21.99
DC24 Printed Circuit Board (PCB) and Reset Module 917831-01
This part is a replacement PCB and reset module from inside the head of your Dyson DC24. A brand ..
£32.99
-200x200.jpg "DC24 YDK YV-07K24 Motor")
DC24 YDK YV-07K24 Motor
This part is a replacement motor (the main one that sits inside the ball of your Dyson DC24). It&..
£61.99
DC24 Brush Roll (Brush Bar)
This is a new brush bar (with built in bearing) to fit all the Dyson DC24 ball range. We like to ..
£9.99
DC24 Red Pedal
This is a new genuine Dyson red rear pedal to fit all the Dyson DC24 ball range. This will also f..
£7.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£2.49
DC24 Ball Roller Bearing Cog.
This is the left side smaller of the two bearings (cog) that are on the ball on a Dyson DC24. ..
£0.99
USA DC25 DC41 DC65 CLEANER HEAD MOTOR DC77(2)XLG 120V
***NOTE: THIS MOTOR IS ONLY FOR NORTH AMERICAN DYSONS**** ***IT IS NOT SUITABLE FOR UK, AUSTRALI..
£29.99
DC25 Reset Switch for USA Models 2.00A
This is a reset switch for USA models of DC25. It is the correct 2.00A type as originally fitted ..
£6.99
-200x200.JPG "DC25 DC41 ERP Cleanerhead Motor Johnson DC771(2)XLLG")
DC25 DC41 ERP Cleanerhead Motor Johnson DC771(2)XLLG
Please note: Due to frequent user misdiagnosis, please be aware this part is NON-RETURNABLE. This..
£27.99
DC25 Cleanerhead PCB Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on a DC25. We a..
£14.99
DC25 Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£52.99
DC25 Cleaner Head Toothed Drive Belt
This is the toothed drive belt from inside the cleaner head on a DC25. This is a genuine Dy..
£3.99
DC22 DC25 SDS1304GZD Panasonic Motor
This is a brand new genuine Dyson Panasonic motor to fit the DC22 and the DC25. Reference numbers..
£56.99
DC02 Packet of Two Cassette Filters
This a packet of two cassette type filters to fit any Dyson DC02. Dyson no longer supply any..
£6.99
DC05 New Wand Handle "Banana"
This is a grey and yellow wand handle (also known as the "Banana") to fit a DC05 cyli..
£14.50
DC02 Wand "Banana" Handle
This is the wand handle (also known as the "Banana") to fit a DC02 cylinder model. This wi..
£14.99
DC07 DC14 DC18 Cable Protector
This is a cable protector to suit the DC07, DC14 and DC18. Note: In order to make..
£0.99
DC05 SDS1204SD Panasonic Motor Conversion
If your DC05 if fitted with the SDS1204SD Panasonic motor, that motor is no longer available. But we..
£49.99
DC05 Cable Rewind
This is the cable rewind to fit all colour and model variants of the DC05. It comes with a ..
£39.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£69.99
DC18 Washable Pre Filter
This is a genuine Dyson washable pre-filter to fit all model variants of the DC18. This is ..
£6.99
Cable Rewind DC08, DC11, DC21
This is the cable rewind to fit the following Dyson cylinder model variants: DC08 DC08T..
£57.75
DC23 DC32 Motor - YV-16K24B
This is the YV-16K24B (YV-16K238) motor for the DC23 and DC32 cylinder models. It will..
£59.99
Washable Pre Filter DC19 DC20 DC21 DC29
This is a washable pre filter to fit the following Dyson cylinder models: DC19 DC20 DC21&nb..
£9.99
DC27 Post Motor HEPA filter
This is the post motor HEPA filter suitable for the DC27. Note: There are two possible..
£8.99
DC27 Post Motor Filter
This is a post motor filter to fit the DC27 vacuum cleaner. Note: There were two possible t..
£8.75
DC08 Handle (silver/yellow) 904510-18
This is the handle for the DC08 cyclinder model in silver with a yellow trim. The lead pric..
£23.99
DC25 wand cap cover
This is the wand cap cover for the Dyson DC25. It fits all model variants of the DC25...
£3.99
DC18 Cleanerhead Coiled Cable Loom
This is the coiled loom from inside the cleanerhead on a Dyson DC18. This is a genuine Dyso..
£16.99
DC25 Yoke Loom Assembly
This is what is known as the 'Yoke Loom Assembly' for the DC25. Sometimes, whe..
£5.99
DC18 Post Motor Filter
This is the post motor filter fitted to Dyson DC18 "All Floors" models (with an amber cyclone). ..
£5.75
DC08/DC11 Stair Tool
This is a silver stair tool to suit the following model of cylinder cleaners: DC08 Telescope W..
£12.99
DC04 Wand Catch (Suits All Colours)
This the wand handle release catch to suit the Dyson DC04. This part has been discontinued by Dys..
£3.99
DC04 Zorbster Thermal Cut Out TOC
This is the thermal cut out (also known as the TOC) from the motor of a DC04 Zorbster. Plea..
£1.99
DC05 Cyclone Top Handle
This is a recycled cyclone top handle to suit any colour variant of the DC05. Availabl..
£16.99
DC03 cable protector
This is a grey cable protector for the DC03. A new genuine Dyson item. ..
£2.99
DC08 YDK Motor Fancase Seal
This is a motor rubber (fan case seal) to fit Dyson DC08's with YDK motors. This is a g..
£9.99
Replacement Extra-Long 10m (32') Mains Lead in Black
This is a heavy duty extra long mains lead (flex) that will suit Dyson models. **Please rea..
£11.99
DC25 Reset Switch for UK Models 1.25A
This is a reset switch for UK/Euro/AUS models of DC25. It is the correct 1.25A type as origi..
£7.99
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£2.99
DC40 Brushbar Motor and Housing Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£48.99
DC40 Panasonic Motor
This is a genuine Dyson (Panasonic) motor for the DC40 Ball. The motor reference ..
£64.99
DC02 Cable Rewind New
This is a new genuine Dyson cable rewind that is ONLY suitable for the DC02. Dyson made the..
£39.99
DC18 Back Hose
This is the backhose for a DC18. It fits both variants of the DC18 being the All Floors and the Alle..
£37.99
Dyson DC02 HEPA Filter
This is the HEPA exhaust filter for Absolute and De Stijl models of the DC02. It will also fit any o..
£9.99
DC07 Bin Flap Base Door
Here we have the bin flap to fit any Dyson DC07. This is a brand new item. As you can see, this i..
£7.99
DC23 DC32 HEPA Filter
This is the HEPA post motor filter to fit the DC23 and the DC32. It will fit all models and var..
£15.99
DC23 DC32 Brush Tool
This is the brush tool to fit the DC23 and the DC32. They will also fit DC24, DC25, DC33, D..
£12.99
Dyson Clutch Cover Assembly
This is a clutch cover assembly to fit the following clutched Dyson models: DC04 DC07 ..
£0.99
DC04 Cyclone Cone and Shroud
This is the inner cyclone cone and surrounding shroud for the Dyson DC04 in yellow. This is..
£6.99
DC18 Brush Roll Motor
This part is the replacement motor which powers the brushbar in the head of your Dyson DC18. A br..
£59.99
DC04 u-bend (inspection pipe)
This is a recycled u-bend to fit any Dyson DC04. These were originally made in a myria..
£4.99
DC04 on off button.
This is a recycled DC04 on/off button (the one you probably broke because you dont have a switch rem..
£1.99
DC14 Three Piece Tool Set
This is a three piece tool set to fit specifically the DC14 model. Unlike other generic Dys..
£9.99
DC41 Cleanerhead PCB Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on a DC41. ..
£22.99
DC25 Cleanerhead Brushroll Cover
This is the perspex brushroll cover from the cleanerhead of the Dyson DC25. It only fits the DC25.&n..
£9.99
DC27 Cleaner Head Assembly
This is the cleanerhead assembly for the Dyson DC27. It fits both models of DC27 being the 'All Floo..
£19.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£57.75
DC40 DC41 DC55 DC75 Back Telescopic Hose
This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..
£16.99
DC23 DC32 Main Motor (Without Cooling Assembly).
This is a good quality after-market motor ONLY for the DC23 and DC32 cylinder models. It comes ..
£39.99
-200x200.JPG "Zorb Tool")
Zorb Tool
Zorb trade carpet cleaner groomer tool for your Dyson vacuum cleaner. With long bristles to wor..
£9.99
Dyson DC01 Long Life Washable Filters
These are original Dyson DC01 washable Bactisafe Long Life filters. A pack of eight. Most p..
£14.99
DC01 Bumper (Furniture Guard) Used
These are USED furniture guards (front bumper) for the DC01. Please note that this item dif..
£4.99
DC14 Wand Cap Cover
This is the wand cap cover for the DC14. It fits all models of DC14. This is a genuine Dyso..
£4.99
DC24 Soleplate - Base plate
This is a new soleplate for the DC24. Please examine the photos to be sure this is the..
£18.99
DC01 DC02 Original Dyson Brush Tool
This is a used original Dyson dusting brush tool as originally supplied only on the DC01 and DC..
£1.49
CR01 CR02 Inner Door Handle White
This is a brand new inner door handle in white from the Dyson CR01 and CR02 washing machine. It..
£19.99
DC40 Yoke Cable Assembly
The DC40 has a known problem of a wire breaking in the ball causing no power to the cleanerhead. ..
£11.99
DC11 Washable Filter
This is a washable filter and holder for your DC11. Please examine the photograph to be certain you ..
£7.49
DC11 HEPA Filter
This is the post motor HEPA filter to suit the Dyson DC11. Please examine the photo to be sure you a..
£10.99
DC11 Post Motor Filter (Non-HEPA)
This is the washable post motor filter to suit the DC11. This is for machines not fitted with a purp..
£7.75
Genuine Dyson DC07 Washable Filter
This is a genuine Dyson washable filter to suit the DC07. We also keep after-market ones mu..
£13.99
Genuine Dyson DC14/15 Washable Filter
This is a genuine Dyson washable filter to suit the DC14 and DC15. We also keep after-marke..
£18.99
DC23 T2 (DC32) Cable Rewind (Euro Plug)
This is a cable rewind assembly to fit the DC23 Motorhead models (will fit some DC32 models too).&nb..
£24.99
Range Rover Sport Dash Non Slip Mat (Sat Nav)
This is the small rubber mat that sits under the navigation screen in Range Rover Sport models produ..
£8.99
DC24 Large Cog Bearing
This is the larger of the two cog type bearings fitted to the Dyson DC24 ball. The oth..
£6.99
DC24 Iron Yoke Bracket
This is the Yoke Bracket from the DC24. Please check the parts drawing on the second picture (it ..
£2.75
DC19/DC20 Turbine Head
This is a turbine head to fit ONLY the models of cylinder/canister Dysons below. DC11 DC19 ..
£54.00
Non-Clutched DC04 Back Hose (Green)
This is a non-genuine Dyson rear hose to fit a non-clutched Dyson DC04 (genuine ..
£14.59
DC21 Motorhead Brush Roll 913957-01
This is a GENUINE DYSON brushroll for the Dyson DC21 Motorhead. Dyson part number: 913957-01 S..
£13.99
DC05 Motorhead Soleplate 904862-01
This is a new soleplate to fit the motorised head on the lavender and silver DC05 Motorhead. ..
£15.99
Crevice tool: DC16 DC30 DC31 DC34 DC35 DC44 DC56 V6
This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2..
£3.60
DC03 Yellow Cassette Assembly.
This is a used yellow cassette assembly from a DC03. It is the part that the back telescopic hose pl..
£5.99
DC08 Allergy Blue Turquoise Contact Head
This is a contact head for DC08 Allergy Blue Turquoise models. Please check your machi..
£54.99
DC02 Motor Bracket
This is the motor bracket (Dyson call it a motor plate) that secures the motor on a DC02. O..
£7.99
10x Dyson DC24 Ball Small Bearing Cogs
Trade pack of 10 Dyson DC24 Ball Small Bearing Cogs This replacement part for the Dyson DC24 cur..
£8.99
DC25 Drive Cog for Brushroll Soleplate
This is the little three-finned drive cog that is attached to the soleplate assembly and drives the&..
£3.99
DC03 Cleaner Head
This is the cleaner head for the DC03. Most were originally in a dull grey colour. This is ..
£41.40
DC02 Tool Cover Door
This is the tool cover door in grey for the Dyson DC02. These have been long obsolete from ..
£12.99
DC05 bumper
This is a recycled bumper strip for the DC05 in yellow. Please note that these are not clea..
£4.99
DC05 Yellow On/Off Actuator
This is the on-off actuator pedal and spring to fit the Dyson DC05. Please note: This is a ..
£1.99
DC05 Yellow Cable Rewind Actuator Pedal
This is the cable rewind actuator pedal and spring to fit the Dyson DC05. Please note:..
£2.99
DC25 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC25 Ball. It comprises of the ..
£12.99
DC24 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC24 Ball. It comprises of the..
£10.99
DC07 HEPA Filter Kit
This is a filter kit for all models and variants of the DC07 fitted with a HEPA filter. It ..
£7.99
DC07 PAD Filter Kit
This is a filter kit for all models and variants of the DC07 fitted with a pad type post-motor ..
£5.49
DC24 Yoke Assembly & Wiring Loom
Genuine Dyson Yoke Assembly & Wiring Loom For Your Dyson DC24 Vacuum Cleaner. Part No: 9147..
£34.99
DC07 Bin Flap Catches (Trade Pack of 10)
This is a trade pack of ten bin flap catches to suit the Dyson DC07. If you only need one, ..
£16.99
DC01 Wand Release Catch
This is the wand release catch for the Dyson DC01. Available in yellow, blue and purple to ..
£2.99
DC03 Wand Release Catch
This is the wand release catch for the Dyson DC03. Available in yellow and purple to s..
£2.99
Purple Cleaner Head DC04 DC07
This is a brand new genuine Dyson purple cleaner head (sometimes called a base housing) for the..
£23.75
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£4.99
Dyson DC15 Wand Top Collar - Tube Grip - Tool Connector
This is what is known as the “tube grip”, together with its retaining clip. This has been unava..
£5.99
Cable Wand Upper Swivel Clip: DC15, DC24, DC25, DC27, DC28, DC33
This is a new swivel clip for the top of the wand that holds the cable in place to fit ONL..
£2.49
Digital Multimeter
This is a compact pocket sized digital multimeter with a clear 3.5 digit, 7 segment, 0.5" LCD d..
£9.75
DC40 Brushroll (non ERP)
This is the brushroll to suit all non ERP models of DC40 ball machines. Suitable for all DC..
£9.99
DC07 Yellow Cyclone Top
Here we have a recycled yellow handle from the top of the cyclone unit to fit any colour v..
£8.99
Genuine Dyson Belts (Non-Clutched)
These belts are now obsolete (Dyson no longer supply them). Please use >>these belts<<&n..
£5.99
Dyson DC01 DC04 Grey Yellow Wheel Kit
This is a brand new wheel kit in grey and yellow for the DC01 and the DC04. It includes the ..
£6.99
10x Dyson DC15 Tool Connectors
This is the DC15 tool connector/wand collar we sell at a discounted price for a quantity of ten aime..
£34.99
-200x200.jpg "DC01 HEPA Bin Catch")
DC01 HEPA Bin Catch
This a recycled bottom filter flap (also known as a bin catch) in yellow, suitable for any ..
£19.99
DC03 Brushroll
This is the brushroll for the Dyson DC03. The colour of your original one may differ, but f..
£24.99
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£4.99
Smiths T15 Screwdriver
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperp..
£2.49
Universal 4 Piece Tool Set
This is what we call our universal tool set (well, almost universal). It is a standard set ..
£4.99
DC26 HEPA post motor filter.
This is the HEPA post motor filter for the DC26. A genuine Dyson part. Suitable for: DC26 M..
£13.99
Budget T8 screwdriver.
This is a budget T8 screwdriver, typically used for the final screw on the DC24 brushroll motor swap..
£0.99
DC14 Power Cord (Flex)
This is the mains cable (you may call it a flex or a cord) to suit any model of Dyson DC14.&nbs..
£11.99
DC39 DC53 Washable Filter
This is a replacement Dyson pre-filter for your Dyson vacuum cleaner. This fits the followi..
£14.99
-200x200.jpg "DC08 Extension Tube")
DC08 Extension Tube
This is the extension tube for standard models of DC08 (not Telescope Wrap models - contact us ..
£30.99
-200x200.jpg "Dyson DC01 Grey Cleaner Head (A)")
Dyson DC01 Grey Cleaner Head (A)
This is a recycled Dyson DC01 (DA001) main cleaner head (lower foot/brush/base/body housing in grey)..
£7.99
DC25 Power Cord (Flex)
This is the mains cable (you may call it a flex or a cord) to suit any model of Dyson DC25.&nbs..
£10.99
DC25 Upright Lock Assembly
This is the upright lock assembly for the Dyson DC25. This is typically the part you need&n..
£11.25
Ametek Motor Kit Dyson DC04 Silver Lime
This is a replacement motor to suit ONLY DC04 models previously fitted with an Ametek motor. ..
£25.99
Six Piece Dyson Tool Set - Fits Most Dyson Vacuums
This is a six piece tool set to fit most Dyson models of vacuum cleaner. Here is what..
£9.99
Dyson 4' (1.2m) Extension Hose DC24 DC25 DC33 DC40 DC41 DC50 DC59 V6
This is a genuine Dyson extension hose. It adds four feet (1.2 metres) to your existing hose (or giv..
£15.75
Tags: Dyson, Torx, screwdriver, T15, special, anti, tamper, star