DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC52, DC53, DC54 and DC41 vacuum cleaner.
The motor is a replacement for motors marked YDK YV-16K24F, YDK YV-16K24FA or YV-16K24FB. Please check before you buy, if in doubt, >>ask us<<.
To fit this to your DC41: For DC41 machines fitted with a YV-16K24F, you would simply swap the TOC from your old motor over to the new one. The TOC is secured by one phillips screw. If your old TOC is damaged (which is unlikely) you will need to fashion some new motor leads using the TOC on the new motor.
Warning: Stripping a Dyson down to replace the motor is not an amateur job (You will need the set of three Torx screwdrivers we sell below). If you need a strip down tutorial, there is a cylinder one >>here<< and various DC41 topics >>here<<.
This motor is suitable for UK, European and Australian machines. It is not suitable for USA machines.
Related Products
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a d..
£19.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£3.49
DC41 Pre Filter
This is the pre-filter to suit the DC41 range. This part is suitable for any DC41 mode..
£10.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£59.99
DC41 Post Motor HEPA Filter
This is a replacement post filter for your DC41 vacuum cleaner. It fits all three variants of the..
£11.99
DC41 Ball Shell Assembly
This is what is known as the Ball Shell Assembly to fit the Dyson DC41. Please examine the ..
£24.49
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£4.99
DC23 - DC50 Brush Tool
This is the brush tool originally designed to fit the DC23 and the DC32. They will also fit..
£7.49
DC41 DC55 DC65 Cleanerhead Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on these models: ..
£26.99
DC40 DC41 DC55 DC75 Back Telescopic Hose
This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..
£16.99
DC41 Part Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£57.99
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£7.99
DC41 DC55 DC75 ERP Cleanerhead Belt
Please note: This is a non returnable item. This is because misdiagnosis is common. Please do not bu..
£3.99
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£5.99
Smiths T15 Screwdriver
This is a new, Smiths T15 torx screwdriver to suit all Dyson models up to DC14 (with ..
£2.49
Dyson Tool Adaptor (Old Tool to New Hose)
Dyson compatible tool adaptor. This adaptor allows the the older 32mm Dyson tools that look like thi..
£3.99
Universal 4 Piece Tool Set
This is what we call our universal tool set (well, almost universal). It is a standard set ..
£9.99
-200x200.JPG "DC41 Ball Yoke Assembly")
DC41 Ball Yoke Assembly
This a yoke assembly for the DC41 (also the DC65 and DC66). This is the part that the ..
£26.99
DC39 DC53 Washable Filter
This is a replacement Dyson pre-filter for your Dyson vacuum cleaner. This fits the followi..
£9.99
DC41 Filter Kit
This is a filter kit comprising of the conical washable pre-motor filter from the centre of the cycl..
£22.75
Post Motor Filter DC28c, DC33c, DC39, DC54 Post Filter
This is the post motor filter that is inside the machine to suit the DC28c, DC33c, DC37, DC38, ..
£49.99
DC41 Soleplate Wheel
This is the soleplate wheel for a DC41. The central wheel on the cleaner head on these mode..
£6.99
DC40 DC41 DC65 Tool Holder
This is the tool holder suitable for the following models: DC40 Animal DC40 Animal Com..
£6.99
-200x200.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
DC41 DC43 DC55 DC65 Cyclone Release Clips.
This is a pair of red cyclone release clips for the Dyson DC41, DC43, DC55 and DC65. There ..
£4.99
DC41 DC43 Cyclone Gasket Seals
This is the gasket seal that is accessed by splitting the cyclone to suit the DC41&nb..
£3.25
DC28c DC33c DC39 Ball Cylinder Type Cyclone Gasket
This is the gasket seal that is accessed by splitting the cyclone to suit the DC28c, ..
£3.25
Six Piece Dyson Tool Set - Fits Most Dyson Vacuums
This is a six piece tool set to fit most Dyson models of vacuum cleaner. Here is what..
£18.99
DC41 Internal Hose and Bracket
This is the internal hose assembly to fit the Dyson DC41. Please examine the picture carefu..
£16.49
DC41 DC75 Cov Hose Assembly
This is the internal hose assembly – called a COV hose or changeover hose – to..
£26.25
-200x200.jpg "DC40 ERP, DC41 ERP, DC65, DC75 Motor")
DC40 ERP, DC41 ERP, DC65, DC75 Motor
This is a 1600w main motor marked Panasonic SDS1553AZFA suitable for the following models: ..
£71.49
-200x200.jpg "DC28c DC33c DC39 Ball Cable Rewind Unit")
DC28c DC33c DC39 Ball Cable Rewind Unit
This is a recycled and tested cable rewind unit to suit most DC28c, DC33c, DC37, DC38..
£28.99
-200x200.jpg "DC41 ERP DC55 ERP Cleanerhead Printed Circuit Board Assembly")
DC41 ERP DC55 ERP Cleanerhead Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on these models: ..
£28.99
Tags: DC41, DC39, motor, 924155-02, 918953-04, ES1557145, ES1557241, YDK, YV-16K24F, 2E08, YV-16K24FA, 3B22