Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models.
This is one of the tools you need to perform virtually any strip down job on your Ball Dyson (including fitting a DC24 brushbar motor).
This is not a cheap and nasty one that will break the first time you use it. It is a hardened and tempered chrome vanadium steel one by Smiths.
The blade is the correct length to access all the deep recessed screws on your Dyson. Every Dyson engineer has one of these. These are the ones we use.
Note: If you are working on late model Dysons, you probably need more than this one alone. We have a good deal for our >>set of three Dyson screwdrivers<< that will allow you to get into any Dyson for any repair job.
Related Products
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a d..
£19.99
-200x200.JPG "DC24 Brushbar Motor Assembly")
DC24 Brushbar Motor Assembly
This part is the DF651(2)LG Johnson replacement motor which powers the brushbar in the head of ..
£23.99
-200x200.jpg "DC24 Printed Circuit Board (PCB) and Reset Module 917831-01")
DC24 Printed Circuit Board (PCB) and Reset Module 917831-01
This part is the replacement PCB and reset module from inside the head of a Dyson DC24. This..
£24.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£3.49
DC24 Ball Roller Bearing Cog.
This is the left side smaller of the two bearings (cog) that are on the ball on a Dyson DC24. ..
£0.99
DC25 Cleaner Head Toothed Drive Belt
This is the toothed drive belt from inside the cleaner head on a DC25. This is a genuine Dy..
£0.99
DC07 DC14 DC18 Cable Protector
This is a cable protector to suit the DC07, DC14 and DC18. Note: In order to make..
£0.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£66.45
DC23 DC32 Motor - YV-16K24B
This is the YV-16K24B (YV-16K238) motor for the DC23 and DC32 cylinder models. It will..
£71.99
DC18 Cleanerhead Coiled Cable Loom
This is the coiled loom from inside the cleanerhead on a Dyson DC18. This is a recycled par..
£9.99
DC25 Yoke Loom
This is what is known as the 'Yoke Loom' for the DC25. Sometimes, when there i..
£3.99
Replacement Extra-Long 11m (36') Mains Lead in Dark Grey
This a good quality heavy duty extra-long new flex, (also known as the cable, lead, cord or wir..
£11.99
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£4.99
DC18 Brush Roll Motor
This part is the replacement motor which powers the brushbar in the head of your Dyson DC18. This..
£17.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£71.99
DC40 DC41 DC55 DC75 Back Telescopic Hose
This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..
£16.99
DC24 Soleplate - Base plate
This is a new soleplate for the DC24. Please examine the photos to be sure this is the..
£11.99
-200x200.jpg "DC01 DC02 Original Dyson Brush Tool")
DC01 DC02 Original Dyson Brush Tool
This is a used original Dyson dusting brush tool as originally supplied only on the DC01 and DC..
£1.99
DC40 Yoke Cable Assembly
The DC40 has a known problem of a wire breaking in the ball causing no power to the cleanerhead. ..
£12.75
-200x200.jpg "Range Rover Sport Dash Non Slip Mat (Sat Nav)")
Range Rover Sport Dash Non Slip Mat (Sat Nav)
This is the small rubber mat that sits under the navigation screen in Range Rover Sport models produ..
£8.99
DC24 Large Cog Bearing
This is the larger of the two cog type bearings fitted to the Dyson DC24 ball. The oth..
£10.99
DC24 Iron Yoke Bracket
This is the Yoke Bracket from the DC24. Please check the parts drawing on the second picture (it ..
£2.75
DC21 Motorhead Brush Roll 913957-01
This is a GENUINE DYSON brushroll for the Dyson DC21 Motorhead. Dyson part number: 913957-01 S..
£13.99
Crevice tool: DC16 DC30 DC31 DC34 DC35 DC44 DC56 V6
This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2..
£3.60
10x Dyson DC24 Ball Small Bearing Cogs
Trade pack of 10 Dyson DC24 Ball Small Bearing Cogs This replacement part for the Dyson DC24 cur..
£8.99
DC25 Drive Cog for Brushroll Soleplate
This is the little three-finned drive cog that is attached to the soleplate assembly and drives the&..
£6.99
-200x200.jpg "DC25 Filter Kit (HEPA and Washable)")
DC25 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC25 Ball. It comprises of the ..
£14.99
DC24 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC24 Ball. It comprises of the..
£14.99
DC24 Yoke Assembly & Wiring Loom
Genuine Dyson Yoke Assembly & Wiring Loom For Your Dyson DC24 Vacuum Cleaner. Part No: 9147..
£34.99
10 x DC07 Bin Flap Catches Trade
This is a trade pack of ten bin flap catches to suit the Dyson DC07. If you only need one, ..
£16.99
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£7.99
Cable Wand Upper Swivel Clip: DC15, DC24, DC25, DC27, DC28, DC33
This is a new swivel clip for the top of the wand that holds the cable in place to fit ONL..
£2.49
Digital Multimeter
This is a compact pocket sized digital multimeter with a clear 3.5 digit, 7 segment, 0.5" LCD d..
£12.99
DC40 Brushroll (non ERP)
This is the brushroll to suit all non ERP models of DC40 ball machines. Suitable for all DC..
£15.99
10x Dyson DC15 Tool Connectors
This is the DC15 tool connector/wand collar we sell at a discounted price for a quantity of ten aime..
£14.99
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£5.99
Smiths T15 Screwdriver
This is a new, Smiths T15 torx screwdriver to suit all Dyson models up to DC14 (with ..
£2.49
DC26 HEPA post motor filter.
This is the HEPA post motor filter for the DC26. Suitable for: DC26 Multi Floor, DC26 Multi..
£11.75
DC50 Brushroll (Brush Roll)
This is an OEM brushroll to fit all standard models of the Dyson DC50. DC50 Animal ..
£15.49
-200x200.jpg "DC25 - DC75 UP22 UP24 Power Cord (Flex)")
DC25 - DC75 UP22 UP24 Power Cord (Flex)
This is our own brand premium quality replacement flex (or cable, wire or lead if you prefer) t..
£13.99
MV Air Freshener Pellets
These citrus perfumed vacuum cleaner freshener capsules emit a pleasant aroma as you vacuum. Idea..
£1.99
Standard 13 Amp Three Pin Plug
These are new standard UK three pin plugs fitted with a 13 amp fuse. They were removed from..
£0.99
10x 13a Three Pin Plugs - White. Electrical Appliance Plugs
These are 10x new standard UK three pin plugs fitted with a 13 amp fuse. They were removed ..
£4.99
Six Piece Dyson Tool Set - Fits Most Dyson Vacuums
This is a six piece tool set to fit most Dyson models of vacuum cleaner. Here is what..
£18.99
Dyson 4' (1.2m) Extension Hose DC24 DC25 DC40 DC41 DC50 DC59 DC75 V6
Please note: This is NOT a replacement back hose for your Dyson – this is an EXTENSI..
£14.49
-200x200.jpg "UP24 Back Telescopic Hose")
UP24 Back Telescopic Hose
This is the red back telescopic hose to fit these models of Dyson: UP24 (all versio..
£44.99
-200x200.jpg "UP22 Back Telescopic Hose")
UP22 Back Telescopic Hose
This is the back telescopic hose to fit these models of Dyson: UP22 'Small Ball..
£42.00
-200x200.jpg "Genuine Dyson DC16 Bin Base Assembly")
Genuine Dyson DC16 Bin Base Assembly
This is a genuine Dyson, brand new old stock DC16 bin base assembly. This will ONLY fit the DC16 ..
£12.99