DC24 Brushbar Motor Assembly
This part is the DF651(2)LG Johnson replacement motor which powers the brushbar in the head of your Dyson DC24. (This is also the same as the YDK YA-3424 motor found in some DC24s). This fits ALL DC24 models.
Often, when the brushbar fails to spin (and the reset button has no effect) this is the part that has gone.
We also wrote the first tutorial on how to replace this motor in your DC24, you can see step-by-step instructions and a video >>here<< (Opens in a new window).
You need a Torx T15, T10 and a T8 to change this motor. You can find those individually or as a set of three in the related products below.
If you only need the cog mechanism, we have those >>here<<.
PLEASE NOTE: This part is NON-RETURNABLE. This part is not under warranty by Johnson as their policy is central to the fact they are not present at the time of fitting and thus cannot assess the expertise of the fitter.
Americans please note: This motor is NOT suitable for USA 120v models. This motor is to fit UK, Australian and European 220-240v machines.
Related Products
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
Dyson Compatible 10m Flex, Cable, Lead, Wire
This a good quality new flex, (also known as the cable, lead, cord or wire) that is suitable fo..
£9.99
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a d..
£19.99
Dyson Power Switch (On Off Switch).
Power Switch for most Dyson Models (not DC01 and DC02). This is a NEW 2 prong / pole (..
£4.99
DC24 Printed Circuit Board (PCB) and Reset Module 917831-01
This part is the replacement PCB and reset module from inside the head of a Dyson DC24. This..
£24.99
DC24 Brushroll End Cap
This part is the replacement brushroll end cap (the one that is at the end of the brushroll on the c..
£7.49
DC24 YDK YV-07K24 Motor
This part is a replacement motor (the main one that sits inside the ball of your Dyson DC24). It&..
£89.99
DC24 Brush Roll (Brush Bar)
This is a new brushroll, beater bar or brush bar (depending what you call it) with built in bearing ..
£9.99
DC24 Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£54.99
DC24 Washable Pre Filter
This is a brand new washable filter to fit all of the DC24 range. This is the filter locate..
£7.99
DC24 Lower Duct Hose
This is a new genuine duct hose to fit all the Dyson DC24 ball range. The one that sits on the si..
£9.75
DC24 Post Motor HEPA Filter
This is the post-motor HEPA filter to suit all models of DC24. This is the one that sits in..
£9.99
DC24 Red Pedal
This is a new genuine Dyson red rear pedal to fit all the Dyson DC24 ball range. This will also f..
£49.99
DC24 Wand Handle
This is the iron coloured complete wand handle with red release button to fit any Dyson DC24. ..
£27.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£3.49
DC24 Ball Roller Bearing Cog.
This is the left side smaller of the two bearings (cog) that are on the ball on a Dyson DC24. ..
£0.99
Stair Tool: DC24, DC25, DC27, DC33, DC41
This is a stair and upholstery tool to fit the following models: It fits the following Dyson mode..
£6.75
DC24 Brushroll Drive Cog Assembly
This is a used drive cog and housing for the DC24. Please note: there are two types of..
£3.99
DC23 - DC50 Brush Tool
This is the brush tool originally designed to fit the DC23 and the DC32. They will also fit..
£7.49
DC24 Soleplate - Base plate
This is a new soleplate for the DC24. Please examine the photos to be sure this is the..
£11.99
DC24 Large Cog Bearing
This is the larger of the two cog type bearings fitted to the Dyson DC24 ball. The oth..
£10.99
DC24 Iron Yoke Bracket
This is the Yoke Bracket from the DC24. Please check the parts drawing on the second picture (it ..
£2.75
Crevice tool: DC23, DC24, DC25, DC27, DC33, DC40, DC41 DC50
This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2..
£3.60
DC24 Cyclone Gasket Seal
This is the gasket seal that is accessed by splitting the cyclone. Sometimes these degrade ..
£3.95
10x Dyson DC24 Ball Small Bearing Cogs
Trade pack of 10 Dyson DC24 Ball Small Bearing Cogs This replacement part for the Dyson DC24 cur..
£8.99
DC24 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC24 Ball. It comprises of the..
£14.99
DC24 Yoke Assembly & Wiring Loom
Genuine Dyson Yoke Assembly & Wiring Loom For Your Dyson DC24 Vacuum Cleaner. Part No: 9147..
£34.99
Cable Wand Upper Swivel Clip: DC15, DC24, DC25, DC27, DC28, DC33
This is a new swivel clip for the top of the wand that holds the cable in place to fit ONL..
£2.49
Digital Multimeter
This is a compact pocket sized digital multimeter with a clear 3.5 digit, 7 segment, 0.5" LCD d..
£12.99
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£5.99
Dyson Tool Adaptor (Old Tool to New Hose)
Dyson compatible tool adaptor. This adaptor allows the the older 32mm Dyson tools that look like thi..
£3.99
Universal 4 Piece Tool Set
This is what we call our universal tool set (well, almost universal). It is a standard set ..
£9.99
DC04 DC14 DC24 Power Cord (Flex)
This is our own brand premium quality replacement flex (or cable, wire or lead if you prefer) t..
£11.99
Six Piece Dyson Tool Set - Fits Most Dyson Vacuums
This is a six piece tool set to fit most Dyson models of vacuum cleaner. Here is what..
£18.99
Dyson DC24 Bin Flap Door
This is a new cyclone bin flap for all models of Dyson DC24. It ONLY fits the Dyson DC24 and not ..
£4.99
Tags: DC24, DF651(2)LG, Brushbar, Brush, Bar, Johnson, Motor, Assembly, 914704-03