DC24 Soleplate - Base plate
This is a new soleplate for the DC24.
Please examine the photos to be sure this is the part you need.
You need a T10 Torx screwdriver do undo the soleplate screws, and a T8 screwdriver to remove the motor from the soleplate - both of which you can find below individually or as part of the Unofficial Tool Kit.
Related Products
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a d..
£19.99
-200x200.JPG "DC24 Brushbar Motor Assembly")
DC24 Brushbar Motor Assembly
This part is the DF651(2)LG Johnson replacement motor which powers the brushbar in the head of ..
£23.99
-200x200.jpg "DC24 Printed Circuit Board (PCB) and Reset Module 917831-01")
DC24 Printed Circuit Board (PCB) and Reset Module 917831-01
This part is the replacement PCB and reset module from inside the head of a Dyson DC24. This..
£24.99
-200x200.jpg "DC24 Brushroll End Cap")
DC24 Brushroll End Cap
This part is the replacement brushroll end cap (the one that is at the end of the brushroll on the c..
£7.49
DC24 YDK YV-07K24 Motor
This part is a replacement motor (the main one that sits inside the ball of your Dyson DC24). It&..
£89.99
-200x200.jpg "DC24 Brush Roll (Brush Bar)")
DC24 Brush Roll (Brush Bar)
This is a new brushroll, beater bar or brush bar (depending what you call it) with built in bearing ..
£9.99
DC24 Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£54.99
DC24 Washable Pre Filter
This is a brand new washable filter to fit all of the DC24 range. This is the filter locate..
£7.99
DC24 Lower Duct Hose
This is a new genuine duct hose to fit all the Dyson DC24 ball range. The one that sits on the si..
£9.75
DC24 Post Motor HEPA Filter
This is the post-motor HEPA filter to suit all models of DC24. This is the one that sits in..
£9.99
-200x200.jpg "DC24 Red Pedal")
DC24 Red Pedal
This is a new genuine Dyson red rear pedal to fit all the Dyson DC24 ball range. This will also f..
£49.99
DC24 Wand Handle
This is the iron coloured complete wand handle with red release button to fit any Dyson DC24. ..
£19.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£3.49
DC24 Ball Roller Bearing Cog.
This is the left side smaller of the two bearings (cog) that are on the ball on a Dyson DC24. ..
£0.99
Stair Tool: DC24, DC25, DC27, DC33, DC41
This is a stair and upholstery tool to fit the following models: It fits the following Dyson mode..
£6.75
Multi Combination Tool: DC23-DC75 DC16-V6
This is a combination multi-tool that is a direct replacement for Dyson part numbers 914338-01,..
£5.99
-200x200.jpg "DC24 Brushroll Drive Cog Assembly")
DC24 Brushroll Drive Cog Assembly
This is a used drive cog and housing for the DC24. Please note: there are two types of..
£3.99
DC24 Large Cog Bearing
This is the larger of the two cog type bearings fitted to the Dyson DC24 ball. The oth..
£10.99
DC24 Iron Yoke Bracket
This is the Yoke Bracket from the DC24. Please check the parts drawing on the second picture (it ..
£2.75
DC24 Cyclone Gasket Seal
This is the gasket seal that is accessed by splitting the cyclone. Sometimes these degrade ..
£3.95
DC24 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC24 Ball. It comprises of the..
£14.99
DC24 Yoke Assembly & Wiring Loom
Genuine Dyson Yoke Assembly & Wiring Loom For Your Dyson DC24 Vacuum Cleaner. Part No: 9147..
£34.99
-200x200.jpg "Dyson DC24 Bin Flap Door")
Dyson DC24 Bin Flap Door
This is a new cyclone bin flap for all models of Dyson DC24. It ONLY fits the Dyson DC24 and not ..
£4.99