DC25 Power Cord (Flex)
- Brand: Premium Quality After-Market Spare Part
- Product Code: DC25 Replacement Flex
- Availability: In Stock
- £10.99
This is the mains cable (you may call it a flex or a cord) to suit any model of Dyson DC25.
3 pin UK plug, two core and 0.75mm. It has the correct male and female spade terminals on there too. You do have to reuse the plastic spade insulation covers and the stowing clip from your old flex.
You need a T15 screwdriver to open the switch housing - if you need one, you can find them in the related products below.
Important: If you are buying a flex, we expect that you are competent enough to be able to fit it safely and make any necessary electrical connections. Fitting a flex is not an amateur job! If you are in any doubt whatsoever, do consult an electrician.
Related Products
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
DC25 Cyclone Top Handle
This the 'cyclone cap assembly' which is the cyclone handle and top from the DC25. This fit..
£17.50
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a g..
£13.97
Dyson Power Switch (On Off Switch).
Power Switch for most Dyson Models (not DC01 and DC02). This is a recycled 2 prong / pole (..
£3.25
DC25 Soleplate Assembly
This is the soleplate assembly to fit on the motorised cleaner head on the DC25 model. This..
£14.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Stair Tool: DC24, DC25, DC27, DC33, DC41
This is a stair and upholstery tool to fit the following models: DC24 DC25 DC27 DC..
£8.99
-200x200.JPG "DC25 DC41 Cleanerhead Motor Johnson DC771(2)XLLG")
DC25 DC41 Cleanerhead Motor Johnson DC771(2)XLLG
This is a new DC771(2)XLLG cleaner head motor to fit inside the DC25 and DC41 cleaner..
£27.99
DC25 Cleanerhead PCB Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on a DC25. We a..
£14.99
DC25 Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£52.99
DC25 Cleaner Head Toothed Drive Belt
This is the toothed drive belt from inside the cleaner head on a DC25. This is a genuine Dy..
£3.99
DC25 Back Telescopic Hose
This is the back telescopic hose to fit the DC25. It fits all models and variants of the DC25. ..
£14.99
DC25 Duct Hose
This is what is called the duct hose to fit all models and variants of the Dyson DC25. ..
£6.99
DC25 Brushroll (Brush Bar)
This is a brand new brush roll (also called a brush bar or beater bar) and fits all models of Dyson ..
£8.99
DC25 Brushroll End Cap
This is a brushroll end cap - in silver/iron colour - to fit all models of Dyson DC25. It is..
£5.99
DC25 Duct Assembly
This a new chassis to fit all models of Dyson DC25 (It's actually called a "duct assembly&q..
£46.75
DC25 Cleanerhead Brushroll Cover
This is the perspex brushroll cover from the cleanerhead of the Dyson DC25. It only fits the DC25.&n..
£9.99
Crevice tool: DC23, DC24, DC25, DC27, DC33, DC40, DC41 DC50
This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2, DC2..
£3.60
DC25 & DC18 Cyclone Gasket Seal
This is the gasket seal that is accessed by splitting the cyclone. Sometimes these degrade ..
£3.25
DC25 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC25 Ball. It comprises of the ..
£12.99
Cable Wand Upper Swivel Clip: DC15, DC24, DC25, DC27, DC28, DC33
This is a new swivel clip for the top of the wand that holds the cable in place to fit ONL..
£2.49
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£4.99
Dyson Tool Adaptor (Old Tool to New Hose)
Dyson compatible tool adaptor. This adaptor allows the the older 32mm Dyson tools that look like thi..
£3.99
Universal 4 Piece Tool Set
This is what we call our universal tool set (well, almost universal). It is a standard set ..
£4.99
DC25 Upright Lock Assembly
This is the upright lock assembly for the Dyson DC25. This is typically the part you need&n..
£11.25