Smiths T15 Screwdriver
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof head to suit later Dyson models too). You need this tool to perform virtually any strip down job on your Dyson.
The blade is the correct length to access all the deep recessed screws on your Dyson.
If you are likely to work on many Dysons, consider our "Unofficial Dyson Trade Tool Set" linked in the 'Related Items' below or the >>set of three Torx screwdrivers<< that has the extra ones you need to work on DC24 and later machines. It has all the correct screwdrivers with anti-tamper bits that you need on later Dysons.
Related Products
Dyson DC07 Workshop Manual
This is a new copy of the "The Unofficial Dyson DC07 Workshop Manual" by Angus Black. It is a 9" x 6..
£4.99
Dyson Belt and Brushroll Removal Tool
By popular demand: This is the (usually) trade-only Dyson belt/brushbar removal tool for DC04/DC07/D..
£6.99
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
Original DC04 Power Cable With Switch Housing
This is an original Dyson DC04 power cable. It comes complete with spade connections, moulded plug, ..
£25.00
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a g..
£13.97
Dyson DC04 On/Off Button Removal Tool
This is a new on/off button removal tool to suit all Dyson DC04 models (We don't chew up the button ..
£1.99
Bottom Internal Hose (Clutched DC04 Type)
This is the small internal hose to fit clutched versions of the Dyson DC04. This is a recycled ..
£4.99
Clutched DC04 Rear Back Telescopic Hose
This is a new after-market grey rear hose with to fit a clutched Dyson DC04. Dyson have discont..
£13.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£2.49
DC04 Cyclone Top inc Retaining Clip.
This is a grey and yellow cyclone top for a DC04. Please note: This part comes as pictured ..
£15.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£57.75
Non-Clutched DC04 Back Hose (Green)
This is a non-genuine Dyson rear hose to fit a non-clutched Dyson DC04 (genuine ..
£14.59
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£4.99
Dyson Tool Adaptor (Old Tool to New Hose)
Dyson compatible tool adaptor. This adaptor allows the the older 32mm Dyson tools that look like thi..
£3.99
10x Dyson Tool Adaptors.
These are the Dyson compatible tool adaptors we sell, here at a discounted price for a qua..
£32.99
DC26 HEPA post motor filter.
This is the HEPA post motor filter for the DC26. A genuine Dyson part. Suitable for: DC26 M..
£13.99
DC04 Brushroll End Caps
This is a pair of new end caps for the brushroll to suit clutched models of the DC04 only. ..
£1.99
DC03 Wand Handle
This is a genuine Dyson recycled wand handle in grey with yellow and/or purple fittings (depend..
£30.00
-200x200.jpg "DC19T2 DC23 DC26 DC32 DC38 DC39 Contact Head Floor Tool")
DC19T2 DC23 DC26 DC32 DC38 DC39 Contact Head Floor Tool
This is a dual mode floor tool/contact head in black which is a budget replacement for the original ..
£9.99
-200x200.JPG "Mini Turbo Head DC24 DC25 DC27 DC33 DC40 DC41")
Mini Turbo Head DC24 DC25 DC27 DC33 DC40 DC41
This is a pattern mini turbine head together with our adaptor that is suitable for the following Dys..
£11.98
-200x200.jpg "DC22 DC23 DC26 DC29 DC32 DC38 DC39 Turbine Head")
DC22 DC23 DC26 DC29 DC32 DC38 DC39 Turbine Head
This is a turbo/turbine floor tool head in grey which is a budget replacement for some original..
£12.99
DC15 Wand Handle
This is a full wand handle for the DC15 Ball. These are very rare now so colour of fittings may v..
£30.99
Budget T8 screwdriver.
This is a budget T8 screwdriver, typically used for the final screw on the DC24 brushroll motor swap..
£0.99
DC14 Power Cord (Flex)
This is the mains cable (you may call it a flex or a cord) to suit any model of Dyson DC14.&nbs..
£10.99
DC04 DC07 DC14 DC33 Upright Lock Assembly.
This is the upright lock assembly to suit the DC04, DC07, DC14 and DC33. It attaches to the..
£2.49
-200x200.jpg "Mini Turbo Turbine Head DC01, DC04 (Green/Grey) DC07 DC14 DC15 DC18")
Mini Turbo Turbine Head DC01, DC04 (Green/Grey) DC07 DC14 DC15 DC18
This is a vacuum-driven mini turbine head together with our adaptor that is suitable for the followi..
£12.99
-200x200.jpg "Dyson DC01 Grey Cleaner Head (A)")
Dyson DC01 Grey Cleaner Head (A)
This is a recycled Dyson DC01 (DA001) main cleaner head (lower foot/brush/base/body housing in grey)..
£7.99
-200x200.jpg "Dyson DC01 DC15 DC18 4 Piece Tool Set")
Dyson DC01 DC15 DC18 4 Piece Tool Set
This is a brand new standard compatible three piece tool set together with the adaptor that allows t..
£7.99
-200x200.jpg "DC03 Back Hose")
DC03 Back Hose
This is a new Dyson back hose to suit any version of the DC03. DC03 Standard ..
£16.99
DC01 (DA001) FIXED Solpelate Baseplate
This is a FIXED type soleplate/baseplate for DA001 and very early DC01 models. Important: P..
£29.99
DC50 Brushroll (Brush Roll)
This is an OEM brushroll to fit all standard models of the Dyson DC50. DC50 An..
£17.99
Dyson DC18 Genuine Dyson Motor
This is a genuine Dyson Panasonic SDS1304GZDB motor suitable for all UK, Australian and EU mode..
£59.99
DC01 De Stijl Red Wand Handle
This is a red wand handle with yellow fittings suitable for the Dyson DC01 De Stijl. ..
£19.99
10x DC04 DC05 DC08 HEPA Filters
This is a trade deal of 10x post motor HEPA filters to fit the following Dyson models: D..
£27.99
DC40 DC41 DC65 Tool Holder
This is the tool holder suitable for the following models: DC40 Animal DC40 Animal Com..
£6.99
DC07 DC14 HEPA Filter Seal
This is the self-adhesive seal for the HEPA filter to suit DC07 or DC14 machines. For large..
£1.99
DC03 Soleplate and Cradle
This is a new genuine Dyson cradle and soleplate for the Dyson DC03. It will fit all varian..
£18.99
-200x200.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
DC41 DC43 DC55 DC65 Cyclone Release Clips.
This is a pair of red cyclone release clips for the Dyson DC41, DC43, DC55 and DC65. There ..
£4.99
DC07 DC14 DC33 Motor Retaining Ring
Genuine recycled replacement motor end fan cover for your Dyson vacuum cleaner. Fits models: Al..
£3.50
YDK (YV) Thermal Cut Out TOC
This is the thermal cut out (TOC) to suit most *most* YDK Dyson motors with codes that start YV. Ple..
£1.99
DC04 Non-Clutched Silver Lime Wand Handle
IMPORTANT: Despite colour variants, there are two basic types of DC04, clutched and&n..
£27.99
DC03 DC04 Wand Handle Curved Top Cover
This is the curved top cover from the wand handle to suit the Dyson DC03 and DC04. This is ..
£3.99
DC05 Vacuum Cleaner Post Motor Filter Cover
This is a used post motor filter cover in grey/silver for the Dyson DC05. This item ONLY fits the..
£4.99
Tags: T15, screwdriver, torx, star, smiths