DC41 Cov Hose Assembly
This is the internal hose assembly – called a COV hose or changeover hose – to fit the Dyson DC41.
Please examine the picture carefully to make sure you are ordering the correct part. There are two small hoses under a DC41.
Related Products
James Dyson's Book: Against The Odds.
James Dyson's Book: Against the Odds: An Autobiography. This is a recycled book in grea..
£9.99
DC41 Pre Filter
This is the pre-filter to suit the DC41 range. This part is suitable for any DC41 mode..
£10.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£69.99
DC41 Post Motor HEPA Filter
This is a replacement post filter for your DC41 vacuum cleaner. It fits all three variants of the..
£11.99
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£2.99
DC41 DC55 DC65 Cleanerhead Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on these models: ..
£24.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£79.99
DC40 DC41 DC55 DC75 Back Telescopic Hose
This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..
£16.99
DC41 Part Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£65.99
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£7.99
DC41 DC55 DC75 ERP Cleanerhead Belt
Please note: This is a non returnable item. This is because misdiagnosis is common. Please do not bu..
£3.99
-200x200.JPG "DC41 Ball Yoke Assembly")
DC41 Ball Yoke Assembly
This a yoke assembly for the DC41 (also the DC65 and DC66). This is the part that the ..
£26.99
DC41 Filter Kit
This is a filter kit comprising of the conical washable pre-motor filter from the centre of the cycl..
£22.75
DC41 Soleplate Wheel
This is the soleplate wheel for a DC41. The central wheel on the cleaner head on these mode..
£6.99
DC40 DC41 DC65 Tool Holder
This is the tool holder suitable for the following models: DC40 Animal DC40 Animal Com..
£6.99
-200x200.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
DC41 DC43 DC55 DC65 Cyclone Release Clips.
This is a pair of red cyclone release clips for the Dyson DC41, DC43, DC55 and DC65. There ..
£4.99
-200x200.jpg "DC25 - DC75 UP22 UP24 Power Cord (Flex)")
DC25 - DC75 UP22 UP24 Power Cord (Flex)
This is our own brand premium quality replacement flex (or cable, wire or lead if you prefer) t..
£10.99
DC41 DC43 Cyclone Gasket Seals
This is the gasket seal that is accessed by splitting the cyclone to suit the DC41&nb..
£3.25
Dyson DC40 DC41 DC42 DC55 DC75 ERP Model Cleaner Head
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£69.99
DC41 Internal Hose and Bracket
This is the internal hose assembly to fit the Dyson DC41. Please examine the picture carefu..
£16.49