DC41 Soleplate Wheel
This is the soleplate wheel for a DC41.
The central wheel on the cleaner head on these models is prone to wear out. The original has a small rubber tyre on that tends to break up. This is the hard one the same as the other four on the soleplate, that we find to be a better replacement as it doesnt have the little tyre on so is less likely to wear.
Please note: We recommend before you buy this that you have a read of >>this topic<< on our forums, as if yours has worn to the degree the axle has come off too, you will need to replace the cleanerhead (or a part cleanerhead) itself.
Related Products
Dyson Compatible Flex, Cable, Lead, Wire
This a new flex, (also known as the cable, lead, cord or wire) that is suitable for any Dyson u..
£8.99
Multi Combination Tool: DC23-DC75 DC16-V6
This is a combination multi-tool that is a direct replacement for Dyson part numbers 914338-01,..
£5.99
DC25 DC41 ERP Cleanerhead Motor Johnson DC771(2)XLLG
Please note: Due to frequent user misdiagnosis, please be aware this part is NON-RETURNABLE. This..
£27.99
DC41 Pre Filter
This is the pre-filter to suit the DC41 range. This part is suitable for any DC41 mode..
£10.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£69.99
DC41 Post Motor HEPA Filter
This is a replacement post filter for your DC41 vacuum cleaner. It fits all three variants of the..
£11.99
DC41 Ball Shell Assembly
This is what is known as the Ball Shell Assembly to fit the Dyson DC41. Please examine the ..
£19.99
Replacement Extra-Long 10m (32') Mains Lead in Black
This is a heavy duty extra long mains lead (flex) that will suit Dyson models. **Please rea..
£11.99
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£2.99
DC41 Cleanerhead PCB Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on a DC41. ..
£22.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£57.75
DC40 DC41 DC55 DC75 Back Telescopic Hose
This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..
£16.99
DC41 Part Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£48.99
Crevice tool: DC23, DC24, DC25, DC27, DC33, DC40, DC41 DC50
This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2, DC2..
£3.60
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£4.99
DC41 Cleanerhead Belt
This is the toothed belt from within the cleanerhead gearbox on a Dyson DC41. The belt numb..
£5.99
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£4.99
Dyson Tool Adaptor (Old Tool to New Hose)
Dyson compatible tool adaptor. This adaptor allows the the older 32mm Dyson tools that look like thi..
£3.99
Universal 4 Piece Tool Set
This is what we call our universal tool set (well, almost universal). It is a standard set ..
£4.99
Mini Turbo Head DC24 DC25 DC27 DC33 DC40 DC41
This is a pattern mini turbine head together with our adaptor that is suitable for the following Dys..
£10.99
DC41 Ball Yoke Assembly
This a yoke assembly for the DC41 (also the DC65 and DC66). This is the part that the ..
£21.99
DC41 Filter Kit
This is a filter kit comprising of the conical washable pre-motor filter from the centre of the cycl..
£22.75
DC40 DC41 DC65 Tool Holder
This is the tool holder suitable for the following models: DC40 Animal DC40 Animal Com..
£6.99
DC41 DC43 DC55 DC65 Cyclone Release Clips.
This is a pair of red cyclone release clips for the Dyson DC41, DC43, DC55 and DC65. There ..
£4.99
DC41 DC43 Cyclone Gasket Seals
This is the gasket seal that is accessed by splitting the cyclone to suit the DC41&nb..
£3.25
Six Piece Dyson Tool Set - Fits Most Dyson Vacuums
This is a six piece tool set to fit most Dyson models of vacuum cleaner. Here is what..
£9.99