Ametek Motor Kit Dyson DC04 Silver Lime


  • £25.99

This is a replacement motor to suit ONLY DC04 models previously fitted with an Ametek motor.

The DC04 Ametek motor was mostly fitted to green and grey DC04 models (without a clutch) and also the lesser-seen DC04i blue and grey models.

The original type of Ametek motor is now long obsolete. What this listing is selling is a good quality alternative Dyson compatible motor, together with our adaptor kit comprising of replacement retaining ring and motor rubbers (second photo). You discard your existing motor rubbers and retaining ring, and fit the kit we send you as a replacement.

One of the many advantages to this conversion is that if you need to replace your motor again in the future, you can simply buy a standard YDK motor instead of this conversion kit. If you have already bought a YDK motor from elsewhere and discovered it doesn't fit, we sell the adaptor kit on its own >>here<<.

Please remember to order the correct filters when changing your motor as these will need changing at the same time as the motor.

Important condition of sale: Our motors very seldom fail prematurely when fitted by an experienced engineer using fresh filters. Occasionally, amateur fitters try to return them as "faulty" having used a hammer on the shaft. A hammer should NEVER be used on a motor shaft. In the unlikely event of a return being needed, it will be immediately disallowed if there is ANY evidence of a hammer having been used at all. 

Related Products

Dyson Belt and Brushroll Removal Tool

Dyson Belt and Brushroll Removal Tool

By popular demand: This is the (usually) trade-only Dyson belt/brushbar removal tool for DC04/DC07/D..

£6.99

Dyson Torx Star Screwdriver T15

Dyson Torx Star Screwdriver T15

This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..

£2.49

YDK (YV) Motor Dyson DC04 DC07 DC14 DC27 DC33

YDK (YV) Motor Dyson DC04 DC07 DC14 DC27 DC33

This is a replacement motor to suit the following UK, European and Australian Dyson models:&nbs..

£20.99

Unofficial Dyson Trade Tool Set

Unofficial Dyson Trade Tool Set

By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a g..

£13.97

Dyson Power Switch (On Off Switch).

Dyson Power Switch (On Off Switch).

Power Switch for most Dyson Models (not DC01 and DC02).  This is a recycled 2 prong / pole (..

£3.25

Dyson DC04 Ametek Motor Adaptor Kit

Dyson DC04 Ametek Motor Adaptor Kit

The Ametek motor was fitted to the lime green and grey/silver non-clutched DC04 and t..

£7.49

Brushroll (Brush Bar) and Soleplate to Suit Non-Clutched Machines

Brushroll (Brush Bar) and Soleplate to Suit Non-Clutched Machines

This is a genuine Dyson brushroll and soleplate kit to suit non-clutched models of the following mac..

£18.49

Bottom Internal Hose (Late Type)

Bottom Internal Hose (Late Type)

This the small internal hose to fit the following Dyson models: DC04 (without a clutch*) DC0..

£6.25

Bottom Internal Hose (Clutched DC04 Type)

Bottom Internal Hose (Clutched DC04 Type)

This is the small internal hose to fit clutched versions of the Dyson DC04. This is a recycled ..

£4.99

DC04 Wand Handle - All Colours - NEW

DC04 Wand Handle - All Colours - NEW

IMPORTANT: Despite colour variants, there are two basic types of DC04, clutched and non-clutched (if..

£24.99

Standard Dyson Clutch

Standard Dyson Clutch

A genuine Dyson clutch with belts to fit the following Dyson models: DC04 (except the DC04 Zor..

£22.50

Clutch with Belts - For DC04 Zorbster Only

Clutch with Belts - For DC04 Zorbster Only

This is a recycled Dyson clutch with Belts to fit lavender and grey Dyson model DC04 Zorbster O..

£16.99

Clutched DC04 Rear Back Telescopic Hose

Clutched DC04 Rear Back Telescopic Hose

This is a new after-market grey rear hose with to fit a clutched Dyson DC04. Dyson have discont..

£13.99

Dyson DC04 Grey Chassis (Spine - Frame - Skeleton)

Dyson DC04 Grey Chassis (Spine - Frame - Skeleton)

This is a grey chassis (some call it a skeleton, duct assembly, frame or a spine) with wheels and ax..

£27.50

T15 Torx Assembly Screws

T15 Torx Assembly Screws

This is a packet of ten Dyson T15 torx headed screws to fit most applications on most Dyson mod..

£1.99

HEPA Filter (Post Motor) DC04, DC05, DC08, DC19.

HEPA Filter (Post Motor) DC04, DC05, DC08, DC19.

This is a post motor HEPA filter to fit the following Dyson models:  DC04 DC05 DC08 ..

£4.49

Sponge Filter & Holder: DC04

Sponge Filter & Holder: DC04

This a new washable sponge pre motor filter and holder to fit model DC04 only. This will fit ANY ..

£3.75

Post Motor Filter Pad DC04 & Cylinders

Post Motor Filter Pad DC04 & Cylinders

This is a new post-motor filter pad to fit the following Dyson models:  DC04 DC05 DC0..

£1.99

DC04 Zorbster Thermal Cut Out TOC

DC04 Zorbster Thermal Cut Out TOC

This is the thermal cut out (also known as the TOC) from the motor of a DC04 Zorbster.  Plea..

£1.99

DC04 Cyclone Top inc Retaining Clip.

DC04 Cyclone Top inc Retaining Clip.

This is a grey and yellow cyclone top for a DC04.  Please note: This part comes as pictured ..

£15.99

DC04 Cyclone Cone and Shroud

DC04 Cyclone Cone and Shroud

This is the inner cyclone cone and surrounding shroud for the Dyson DC04 in yellow.  This is..

£6.99

DC04 u-bend (inspection pipe)

DC04 u-bend (inspection pipe)

This is a recycled u-bend to fit any Dyson DC04.  These were originally made in a myria..

£1.99

YDK (YV) Thermal Cut Out TOC

YDK (YV) Thermal Cut Out TOC

This is the thermal cut out (TOC) to suit most *most* YDK Dyson motors with codes that start YV. Ple..

£1.99

DC03 DC04 Wand Handle Curved Top Cover

DC03 DC04 Wand Handle Curved Top Cover

This is the curved top cover from the wand handle to suit the Dyson DC03 and DC04.  This is ..

£3.99

Soleplate Roller Wheel Set

Soleplate Roller Wheel Set

This is a set of 5 soleplate wheels and axles to suit the following clutched Dyson models: ..

£3.99

Tags: Ametek