YDK (YV) Motor Dyson DC04 DC07 DC14 DC27 DC33
This is a replacement motor to suit the following UK, European and Australian Dyson models:
- DC04 (see notes below)
- DC07
- DC14
- DC27
- DC33
This motor replaces 220-240v motors labelled with YV-511, YV-2200, YV-16K24EE, YV-16K24ED and YV-16K24EC.
This motor is 220-240 volts/1600 watts and is NOT suitable for USA models.
This motor has the correct external suppression and overload thermal cut-out, which not all motors do.
Please remember to order the correct filters when changing your motor as these will need changing at the same time as the motor.
DC04 owners: If you have a non-clutched lime green/grey or a pale blue/grey non-clutched DC04/DC04i, that has an Ametek motor. You should use >this conversion kit< instead.
If you have a lavender/grey DC04 Zorbster model, you need to swap over your old thermal cut out to the new motor to retain dual speed Zorbster functionality.
Important condition of sale: Our motors very seldom fail prematurely when fitted by an experienced engineer using fresh filters. Occasionally, amateur fitters try to return them as "faulty" having used a hammer on the shaft. A hammer should NEVER be used on a motor shaft. In the unlikely event of a return being needed, it will be immediately disallowed if there is ANY evidence of a hammer having been used at all.
Related Products
Dyson DC07 Workshop Manual
This is a new copy of the "The Unofficial Dyson DC07 Workshop Manual" by Angus Black. It i..
£4.99
Dyson Belt and Brushroll Removal Tool
This is the Dyson belt/brushbar removal tool for DC04/DC07/DC14/DC33 machines with brush control (ma..
£14.99
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
-200x200.jpg "Unofficial Dyson Trade Tool Set")
Unofficial Dyson Trade Tool Set
By Popular Demand: Here we have all the tools we sell to repair almost any Dyson, altogether, at a d..
£15.99
Dyson Power Switch (On Off Switch).
Power Switch for most Dyson Models (not DC01 and DC02). This is a NEW 2 prong / pole (..
£3.25
Dyson DC04 Ametek Motor Adaptor Kit
The Ametek motor was fitted to the lime green and grey/silver non-clutched DC04 and t..
£7.49
Dyson DC27 soleplate.
This is a soleplate to fit the DC27. This is a new, genuine Dyson spare part. This asse..
£29.99
Brushroll (Brush Bar) and Soleplate to Suit Non-Clutched Machines
Dyson have now discontinued this part. These are the last stocks. This is a genuine br..
£45.99
Bottom Internal Hose (Late Type)
This the small internal hose to fit the following Dyson models: DC04 (without a clutch*) DC0..
£7.99
Bottom Internal Hose (Clutched DC04 Type)
This is the small internal hose to fit clutched versions of the Dyson DC04. This is a new genuine&nb..
£14.99
DC04 Wand Handle - All Colours - NEW
IMPORTANT: Despite colour variants, there are two basic types of DC04, clutched and non-clutched (if..
£19.99
Standard Dyson Clutch
A genuine Dyson clutch with belts to fit the following Dyson models: DC04 (except the DC04 Zor..
£34.99
Clutch with Belts - For DC04 Zorbster Only
This is a recycled Dyson clutch with Belts to fit lavender and grey Dyson model DC04 Zorbster O..
£16.99
-200x200.jpg "Clutched DC04 Rear Back Telescopic Hose")
Clutched DC04 Rear Back Telescopic Hose
This is a good quality rear hose designed to fit a clutched Dyson DC04. This will fit any DC..
£14.99
Dyson DC04 Grey Chassis (Spine - Frame - Skeleton)
This is a grey chassis (some call it a skeleton, duct assembly, frame or a spine) with wheels and ax..
£27.50
T15 Torx Assembly Screws
This is a packet of ten Dyson T15 torx headed screws to fit most applications on most Dyson mod..
£1.99
HEPA Filter (Post Motor) DC04, DC05, DC08, DC19.
This is a post motor HEPA filter to fit the following Dyson models: DC04 DC05 DC08 ..
£4.49
Sponge Filter & Holder: DC04
This a new washable sponge pre motor filter and holder to fit model DC04 only. This will fit ANY ..
£3.75
New Silver Dyson DC07 Cyclone Top Handle
Here we have a brand new top handle unit from the top of the cyclone unit to fit any colour var..
£15.99
Hepa Allergy Animal Filter to Suit DC07 & DC14
HEPA post-motor exhaust filter for all DC07 and DC14 models. This is a non-washable fi..
£4.99
Dyson DC07 Silver Chassis (Spine - Frame - Skeleton - Duct)
This is a grey/silver chassis (some call it a skeleton, duct assembly, frame or a spine) with wheels..
£75.00
Dyson DC07/DC14 Inspection U-Bend
This is the u-bend to fit any Dyson DC07 or DC14. These were originally made in a myriad of..
£9.99
Valve Pipe Assembly DC07 DC14
This is the valve pipe assembly to fit any Dyson DC07 or DC14. These were originally m..
£1.99
Dyson DC07 Motor Casing Cover and Post Motor Filter Cover
This is the front motor casing cover together with the post motor filter vent cover to suit any Dyso..
£10.99
Recycled Motor Rubbers for Dyson DC07/14/33 Models
Recycled motor rubbers to fit Dyson DC07 models. The main fan case seal (the bigger one) will als..
£11.99
New DC07 Rear Back Telescopic Hose -- All Colours
This is the rear hose to fit a Dyson DC07 suitable for *any* DC07 model. These are good qual..
£12.99
Post Motor Filter Pad DC07/DC14
This a new post motor filter pad to fit all models of DC07 and DC14 (if you don't want to b..
£1.99
Post Motor Filter Pad DC04 & Cylinders
This is a new post-motor filter pad to fit the following Dyson models: DC04 DC05 DC0..
£1.99
Dyson DC14 Wand Top Collar - Tube Grip - Tool Connector
This is what is known as the “tube grip”, together with its retaining clip. This ha..
£4.99
DC14 Rear Back Telescopic Hose
This is the rear hose to fit a Dyson DC14. This will fit *any* DC14 model. The original hoses com..
£14.99
DC27 Back Telescopic Hose
This is the back telescopic hose to suit both 'All Floors' and 'Animal' va..
£19.99
DC33 Back Telescopic Hose
This is the back telescopic hose to suit all models of DC33: DC33 Animal, DC33 Multi Floor..
£14.99
DC33 HEPA Filter
This is the HEPA filter for all models and variants of the DC33. We recommend changing..
£8.99
DC27 Post Motor HEPA filter
This is the post motor HEPA filter suitable for the DC27. This is the filter that..
£7.99
DC27 Post Motor Filter
Note: We have discontinued this type of filter now, please use >>this one<< instead..
£10.99
DC27 Washable Filter
This is the pre-motor washable filter to suit both models of the DC27: The DC27 All Floor..
£9.75
DC04 Zorbster Thermal Cut Out TOC
This is the thermal cut out (also known as the TOC) from the motor of a DC04 Zorbster. Plea..
£1.99
DC04 Cyclone Top inc Retaining Clip.
This is a recycled cyclone top for a DC04. Please note: This part comes as pictured - ..
£34.99
DC27 Bottom Internal Hose
This is the bottom internal hose to suit ONLY the Dyson DC27. A genuine Dyson spare part.&n..
£15.99
DC07 Bin Flap Base Door
This is a new bin flap to fit any Dyson DC07. These are clear plastic so they're co..
£11.49
DC04 Cyclone Cone and Shroud
This is the inner cyclone cone and surrounding shroud for the Dyson DC04 in yellow. This is..
£6.99
DC04 u-bend (inspection pipe)
This is a recycled u-bend to fit any Dyson DC04. These were originally made in a myria..
£9.99
DC27 Cleaner Head Assembly
This is the cleanerhead assembly for the Dyson DC27. It fits both models of DC27 being the 'All Floo..
£19.99
DC14 Wand Cap Cover
This is the wand cap cover for the DC14. It fits all models of DC14. This is a genuine Dyso..
£4.99
Genuine Dyson DC07 Washable Filter
This is a genuine Dyson washable filter to suit the DC07. Old stock priced to clear. ..
£2.99
Genuine Dyson DC14/15 Washable Filter
This is a genuine Dyson washable filter to suit the DC14 and DC15. We also keep after-marke..
£24.99
DC07 HEPA Filter Kit
This is a filter kit for all models and variants of the DC07 fitted with a HEPA filter. It ..
£7.99
DC07 PAD Filter Kit
This is a filter kit for all models and variants of the DC07 fitted with a pad type post-motor ..
£5.49
Purple Cleaner Head DC04 DC07
This is a brand new genuine Dyson purple cleaner head (sometimes called a base housing) for the..
£23.75
-200x200.jpg "DC04 DC14 DC24 Power Cord (Flex)")
DC04 DC14 DC24 Power Cord (Flex)
This is our own brand premium quality replacement flex (or cable, wire or lead if you prefer) t..
£10.99
DC07 DC14 DC33 Motor Retaining Ring
Genuine recycled replacement motor end fan cover for your Dyson vacuum cleaner. Fits models: Al..
£3.50
YDK (YV) Thermal Cut Out TOC
This is the thermal cut out (TOC) to suit most *most* YDK Dyson motors with codes that start YV. Ple..
£1.99
DC03 DC04 Wand Handle Curved Top Cover
This is the curved top cover from the wand handle to suit the Dyson DC03 and DC04. This is ..
£3.99
Ametek Motor Kit Dyson DC04 Silver Lime
This is a replacement motor to suit ONLY DC04 models previously fitted with an Ametek motor. ..
£25.99
-200x200.jpg "Multi Purpose Heavy Duty Orange Flex 10m")
Multi Purpose Heavy Duty Orange Flex 10m
This is an orange replacement flex (or cable, wire or lead if you prefer) to suit all upright D..
£7.99
Tags: YV-511, YV-2200, YV-16K24EE, YV-16K24ED, YV-16K24EC, 911934-01, 911931-01, 914779-06, 914779-07, DC04, DC07, DC14, DC27, DC33