Red Cyclone Release Clip DC40 UP22 UP24

  • Brand: Manchester Vacs
  • Product Code: DC40 Cyclone Release Clip
  • Availability: In Stock

  • £7.99

This is the red cyclone release clip to suit all versions of the following models:

  • DC40 (including DC40i and ERP) 
  • DC42 (Canadian model – see notes below)
  • UP22 Light Ball Upright
  • UP24 Ball Animal 2 Upright

Please be certain this clip will fit your vacuum BEFORE you buy it by removing the cyclone bin, looking at the silver sticker on the chassis behind and making sure it says that the model is a DC40, DC42, UP22 or UP24 there. If it says anything else, this clip will NOT fit.

What we supply here is actually two slightly different clips together with a spring in case you lost that too (see the last photo). Some early DC40 models have a slightly different variant of the clip so we enclose both types to ensure compatibility with all DC40 models. Simply discard the one you don’t need. 

There is a topic on our forums that explains fitting the clip that you can find >here<.

Note for DC42 owners: We do not ship to some countries – including Canada – from this site, if you are overseas you can buy this item >here< and get tracked delivery. 

Related Products

Dyson Tangle-Free Turbine Tool

Dyson Tangle-Free Turbine Tool

This is a reconditioned Dyson Tangle-Free Turbine Tool to suit most mains-powered Dyson vacuums..

£19.99

Stair Tool: DC24, DC25, DC27, DC33, DC41

Stair Tool: DC24, DC25, DC27, DC33, DC41

This is a stair and upholstery tool to fit the following models: It fits the following Dyson mode..

£4.99

Multi Combination Tool: DC23-DC75 DC16-V6

Multi Combination Tool: DC23-DC75 DC16-V6

This is a combination multi-tool that is a direct replacement for Dyson part numbers 914338-01,..

£5.99

DC40 Pre Filter

DC40 Pre Filter

This is a replacement washable pre-filter for all the DC40 models.  DC40 Animal DC40 An..

£9.99

DC40 Post Motor Filter

DC40 Post Motor Filter

This is a replacement post motor filter assembly for your Dyson DC40 vacuum cleaner. Suitable for..

£9.99

DC40 Brushbar Motor and Housing Assembly

DC40 Brushbar Motor and Housing Assembly

NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..

£51.50

DC40 Panasonic Motor

DC40 Panasonic Motor

This is a genuine Dyson (Panasonic) motor for the DC40 Ball.  The motor reference ..

£64.99

Flexi Crevice Tool

Flexi Crevice Tool

The Dyson Flexi crevice tool extends and flexes to clean awkward gaps with your Dyson vacuum cleaner..

£21.99

DC40 DC41 DC55 DC75 Back Telescopic Hose

DC40 DC41 DC55 DC75 Back Telescopic Hose

This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..

£16.99

DC40 Yoke Cable Assembly

DC40 Yoke Cable Assembly

The DC40 has a known problem of a wire breaking in the ball causing no power to the cleanerhead. ..

£11.99

Crevice tool: DC23, DC24, DC25, DC27, DC33, DC40, DC41 DC50

Crevice tool: DC23, DC24, DC25, DC27, DC33, DC40, DC41 DC50

This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2, DC2..

£3.60

DC40 Brushroll (non ERP)

DC40 Brushroll (non ERP)

This is the brushroll to suit all non ERP models of DC40 ball machines.  Suitable for all DC..

£15.99

Set of three Dyson Torx Screwdrivers

Set of three Dyson Torx Screwdrivers

This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..

£5.99

Dyson Tool Adaptor (Old Tool to New Hose)

Dyson Tool Adaptor (Old Tool to New Hose)

Dyson compatible tool adaptor. This adaptor allows the the older 32mm Dyson tools that look like thi..

£3.99

DC40 DC41 DC65 Tool Holder

DC40 DC41 DC65 Tool Holder

This is the tool holder suitable for the following models:  DC40 Animal DC40 Animal Com..

£6.99

DC40 Full Cleanerhead Assembly

DC40 Full Cleanerhead Assembly

NOTICE: Please do not buy this part on spec simply because your brush isn't turning. Please make..

£69.99

DC40 DC42 Cyclone Gasket Seals

DC40 DC42 Cyclone Gasket Seals

This is the gasket seal that is accessed by splitting the cyclone to suit the DC40 an..

£3.25

DC40 DC50 Changeover Valve Hose

DC40 DC50 Changeover Valve Hose

This is the short lower duct hose that is on the changeover valve on Dyson DC40, DC42, DC50 and DC51..

£9.99

DC40 DC42 Internal Hose Assembly

DC40 DC42 Internal Hose Assembly

This is the small internal hose from the underside/inside of the Dyson DC40 and DC42 (note..

£11.99

DC40 Swivel Lock Arm

DC40 Swivel Lock Arm

This is the swivel lock arm for the DC40.  This fits all models and variants of th..

£3.99

DC40 DC41 DC55 DC65 DC75 ERP Brushroll.

DC40 DC41 DC55 DC65 DC75 ERP Brushroll.

This is a genuine Dyson brushroll to fit ERP models only of the following models: DC40 ERP D..

£43.99

Large Dusting Brush Tool for Dyson Vacuum Cleaners.

Large Dusting Brush Tool for Dyson Vacuum Cleaners.

This is a large soft dusting brush tool for your Dyson vacuum cleaner.  It comes with a quic..

£9.99

Six Piece Dyson Tool Set - Fits Most Dyson Vacuums

Six Piece Dyson Tool Set - Fits Most Dyson Vacuums

This is a six piece tool set to fit most Dyson models of vacuum cleaner.   Here is what..

£9.99

Dyson 4' (1.2m) Extension Hose DC24 DC25 DC40 DC41 DC50 DC59 DC75 V6

Dyson 4' (1.2m) Extension Hose DC24 DC25 DC40 DC41 DC50 DC59 DC75 V6

Please note: This is NOT a replacement back hose for your Dyson – this is an EXTENSI..

£13.49