DC41 DC43 DC55 DC65 Cyclone Release Clips.
-500x500.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
-500x500.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
-500x500.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
-500x500.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
-500x500.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
This is a pair of red cyclone release clips for the Dyson DC41, DC43, DC55 and DC65.
There are two designs of clips fitted to DC41, DC43, DC55 and DC65 machines (Dyson tweaked them mid production) but this is the later design, which fits all variants. However, if your machine has the earlier design, you must swap both parts which requires a certain degree of technical competence and is not an amateur job.
Please note: Although these look similar to release clips on other models, they are NOT. Please do not buy these hoping to fit them on a DC33, DC40, DC50 etc., as they will not fit.
These parts are non-genuine compatible spare parts and any manufacturers names and/or part numbers are used for reference purposes only.
Related Products
DC41 Pre Filter
This is the pre-filter to suit the DC41 range. This part is suitable for any DC41 mode..
£11.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£66.45
DC41 Post Motor HEPA Filter
This is a replacement post filter for your DC41 vacuum cleaner. It fits all three variants of the..
£11.99
DC41 Ball Shell Assembly
This is what is known as the Ball Shell Assembly to fit the Dyson DC41. Please examine the ..
£24.49
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£4.99
DC41 DC55 DC65 Cleanerhead Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on these models: ..
£26.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£71.99
DC41 Part Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£57.99
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£7.99
DC41 DC55 DC75 ERP Cleanerhead Belt
Please note: This is a non returnable item. This is because misdiagnosis is common. Please do not bu..
£3.99
Set of three Dyson Torx Screwdrivers
This is a set of three Smiths Torx star screwdrivers that will enable you to get into any Dyson vacu..
£5.99
Smiths T15 Screwdriver
This is a new, Smiths T15 torx screwdriver to suit all Dyson models up to DC14 (with ..
£2.49
-200x200.JPG "DC41 Ball Yoke Assembly")
DC41 Ball Yoke Assembly
This a yoke assembly for the DC41 (also the DC65 and DC66). This is the part that the ..
£26.99
DC41 Filter Kit
This is a filter kit comprising of the conical washable pre-motor filter from the centre of the cycl..
£22.75
DC41 Soleplate Wheel
This is the soleplate wheel for a DC41. The central wheel on the cleaner head on these mode..
£6.99
DC41 DC43 Cyclone Gasket Seals
This is the gasket seal that is accessed by splitting the cyclone to suit the DC41&nb..
£3.25
Six Piece Dyson Tool Set - Fits Most Dyson Vacuums
This is a six piece tool set to fit most Dyson models of vacuum cleaner. Here is what..
£18.99
DC41 Internal Hose and Bracket
This is the internal hose assembly to fit the Dyson DC41. Please examine the picture carefu..
£16.49
DC41 DC75 Cov Hose Assembly
This is the internal hose assembly – called a COV hose or changeover hose – to..
£12.50
-200x200.jpg "DC41 ERP DC55 ERP Cleanerhead Printed Circuit Board Assembly")
DC41 ERP DC55 ERP Cleanerhead Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on these models: ..
£28.99