DC41 Internal Hose and Bracket
This is the internal hose assembly to fit the Dyson DC41.
Please examine the picture carefully to make sure you are ordering the correct part. There are two small hoses under a DC41.
Related Products
James Dyson's Book: Against The Odds.
James Dyson's Book: Against the Odds: An Autobiography. This is a recycled book in grea..
£9.99
DC41 Pre Filter
This is the pre-filter to suit the DC41 range. This part is suitable for any DC41 mode..
£10.99
DC41 Full Cleaner Head Unit
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because your ..
£59.99
DC41 Post Motor HEPA Filter
This is a replacement post filter for your DC41 vacuum cleaner. It fits all three variants of the..
£11.99
DC41 C-Clip Connector
This a replacement swivel C-Clip connector for your DC41 vacuum cleaner. Suitable for: DC4..
£2.99
DC41 DC55 DC65 Cleanerhead Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on these models: ..
£24.99
DC41 DC28c-DC54 Main Motor
This is a genuine Dyson motor to suit the DC28c, DC33c, DC37, DC38, DC39, DC46, DC47, DC48, DC49, DC..
£69.99
DC40 DC41 DC55 DC75 Back Telescopic Hose
This is the back telescopic hose to fit the DC75, DC65, DC55 and all ten models of the Dyson DC..
£16.99
DC41 Part Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£57.99
DC41 Motor Loom Service Assembly
This is the motor loom assembly for the DC41. This *can* be the culprit when you have no power to..
£7.99
DC41 DC55 DC75 ERP Cleanerhead Belt
Please note: This is a non returnable item. This is because misdiagnosis is common. Please do not bu..
£3.99
-200x200.JPG "DC41 Ball Yoke Assembly")
DC41 Ball Yoke Assembly
This a yoke assembly for the DC41 (also the DC65 and DC66). This is the part that the ..
£26.99
DC41 Filter Kit
This is a filter kit comprising of the conical washable pre-motor filter from the centre of the cycl..
£22.75
DC41 Soleplate Wheel
This is the soleplate wheel for a DC41. The central wheel on the cleaner head on these mode..
£6.99
DC40 DC41 DC65 Tool Holder
This is the tool holder suitable for the following models: DC40 Animal DC40 Animal Com..
£6.99
-200x200.jpg "DC41 DC43 DC55 DC65 Cyclone Release Clips.")
DC41 DC43 DC55 DC65 Cyclone Release Clips.
This is a pair of red cyclone release clips for the Dyson DC41, DC43, DC55 and DC65. There ..
£4.99
DC41 DC43 Cyclone Gasket Seals
This is the gasket seal that is accessed by splitting the cyclone to suit the DC41&nb..
£3.25
Dyson DC40 DC41 DC42 DC55 DC75 ERP Model Cleaner Head
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£69.99
DC41 Cov Hose Assembly
This is the internal hose assembly – called a COV hose or changeover hose – to..
£10.99