DC25 Filter Kit (HEPA and Washable)
This is a filter kit for all models and variants of the DC25 Ball.
It comprises of the washable filter from inside the cyclone and the HEPA filter that is inside the ball.
These are only these two filters fitted to your Dyson DC25, so with this kit you know you are buying the right ones.
You will find the filters individually below if you only need one, but we offer them also as a pair here with a modest saving over buying them individually.
Related Products
Dyson Torx Star Screwdriver T15
This is a new, Smiths T15 torx screwdriver to suit all Dyson models (with the tamperproof ..
£2.49
DC25 Cyclone Top Handle
This the 'cyclone cap assembly' which is the cyclone handle and top from the DC25. This fit..
£17.50
DC25 Soleplate Assembly
This is the soleplate assembly to fit on the motorised cleaner head on the DC25 model. This..
£14.99
Dyson T10 Torx Star Screwdriver.
This is a new, good quality Smiths torx screwdriver to suit late model Dyson models. This is one ..
£2.99
Dyson T8 Torx Star Screwdriver
This is a new Smiths T8 torx screwdriver that you need to undo the final screw when replacing a..
£3.49
Stair Tool: DC24, DC25, DC27, DC33, DC41
This is a stair and upholstery tool to fit the following models: It fits the following Dyson mode..
£4.99
-200x200.jpg "DC25 DC41 ERP Cleanerhead Motor Johnson DC771(2)XLLG")
DC25 DC41 ERP Cleanerhead Motor Johnson DC771(2)XLLG
Please note: Due to frequent user misdiagnosis, please be aware this part is NON-RETURNABLE. ..
£23.99
-200x200.jpg "DC25 Cleanerhead PCB Printed Circuit Board Assembly")
DC25 Cleanerhead PCB Printed Circuit Board Assembly
This is the PCB printed circuit board assembly from inside the cleanerhead on a DC25. ..
£6.99
DC25 Cleaner Head Assembly
NOTICE: This is a non-returnable part. Please do not buy this part on spec simply because ..
£57.99
DC25 Cleaner Head Toothed Drive Belt
This is the toothed drive belt from inside the cleaner head on a DC25. This is a genuine Dy..
£0.99
DC25 Back Telescopic Hose
This is the back telescopic hose to fit the DC25. It fits all models and variants of the DC25. ..
£15.99
DC25 Duct Hose
This is what is called the duct hose to fit all models and variants of the Dyson DC25. ..
£7.99
DC25 Stabiliser Assembly
This is the part known as the stabiliser assembly from the rear undercarriage of the DC25. It com..
£43.99
DC22 DC25 SDS1304GZD Panasonic Motor
This is a brand new genuine Dyson Panasonic motor to fit the DC22 and the DC25. Reference numbers..
£64.99
DC25 Brushroll (Brush Bar)
This is a brand new brush roll (also called a brush bar or beater bar) and fits all models of Dyson ..
£9.99
DC25 Brushroll End Cap
This is a brushroll end cap - in silver/iron colour - to fit all models of Dyson DC25. It is..
£5.99
DC25 Red Rear Release Pedal
This a new genuine Dyson rear release pedal in red that fits at the bottom of the machine at the bac..
£12.75
DC25 Duct Assembly
This a new chassis to fit all models of Dyson DC25 (It's actually called a "duct assembly&q..
£59.99
DC25 soleplate wheel and axle.
This is the DC25 soleplate wheel and axle. Check the other image to be sure you a..
£1.99
DC25 Yoke Loom Assembly
This is what is known as the 'Yoke Loom Assembly' for the DC25. Sometimes, whe..
£12.99
DC25 Cleanerhead Brushroll Cover
This is the perspex brushroll cover from the cleanerhead of the Dyson DC25. It only fits the DC25.&n..
£9.99
Crevice tool: DC23, DC24, DC25, DC27, DC33, DC40, DC41 DC50
This is a brand new 25cm (9.75") crevice tool for the following Dyson models: DC16, DC19T2, DC2..
£3.60
DC25 & DC18 Cyclone Gasket Seal
This is the gasket seal that is accessed by splitting the cyclone. Sometimes these degrade ..
£4.25
10x Dyson DC24 Ball Small Bearing Cogs
Trade pack of 10 Dyson DC24 Ball Small Bearing Cogs This replacement part for the Dyson DC24 cur..
£8.99
DC25 Drive Cog for Brushroll Soleplate
This is the little three-finned drive cog that is attached to the soleplate assembly and drives the&..
£6.99
-200x200.jpg "DC25 - DC75 UP22 UP24 Power Cord (Flex)")
DC25 - DC75 UP22 UP24 Power Cord (Flex)
This is our own brand premium quality replacement flex (or cable, wire or lead if you prefer) t..
£10.99
DC25 Upright Lock Assembly
This is the upright lock assembly for the Dyson DC25. This is typically the part you need&n..
£17.99
Reconditioned Dyson DC25
If this item is out of stock, please >>read our vacuum guide<< and explore som..
£159.00
DC25 Small Bearing Cog
This is what is known as the small bearing (cog) that goes on the filter side of the DC25 ball assem..
£2.99